Home Jobs in Saudi Arabia Jobs in Dammam Khobar Eastern Province Design Engineer Jobs in Dammam Khobar Eastern Province Design Engineer

Design Engineer FEED Oil and Gas

National Advanced Consulting Engineering Company (NACEC)

Posted on July 18, 2019

7 - 14 years Dammam/Khobar/Eastern Province - Saudi Arabia

Bachelor of Technology/Engineering. Any Nationality

Medical Insurance & Vacation tickets.

Easy Apply

Openings 10

Job Description

EMAIL JOB
Email sent successfully.

GENERAL JOB DESCRIPTIONS:

All Engineers shall have respective Engineering Degree with a minimum 7 – 10 years of Engineering Design experience from Conceptual Front End Engineering Design to Detailed Engineering related to Oil & Gas, Refineries & Petrochemical Industries and shall be conversant with the application and verification of relevant International Codes and Standards and capable of working on all project activities found in such Industries. They shall also provide Procurement & Construction Management support. All Engineers should have Engineering Design Consultancy Experience. Shall have very good inter-personal and effective communication skills.

1) CIVIL & STRUCTURAL DESIGN ENGINEERS

Shall be experience in Industrial & Community Infrastructure Development, site development / preparation design, grading, paving, road works (plan & profile), utility piping, storm water / drainage system involving revamping, process plant offsite piping systems, expansion and grass-root projects and be familiar with current industry work process and engineering software applications such as Land Desktop, Civil 3D & Bentley In-Roads.

Shall be experience in both reinforced concrete and steel structures. Should have thorough knowledge of industry standard software applications, including STAAD.Pro, have experience with Intergraph PDS, and Smart Plant Applications, and AVEVA PDMS, and be familiar with current industry work process.

2) ELECTRICAL DESIGN ENGINEERS

a) Conversant with International codes and standards. Candidates should have experience within the Process Plant, Oil & Gas, and Petro-chemical Industries, and will have been exposed to all electrical engineering activities and work process found in this sector, including the preparation of;
• Technical specifications and project instructions
• Technical calculations
• Electrical deliverables for the process plant industries
• Conversant with industry standard software applications, including Intergraph and AVEVA Electrical applications and ETAP.

b) Shall be capable of independently handling all electrical activities of Detail Design engineering of Oil & Petrochemical projects. Shall be able to prepare Electrical One Line Diagrams, Protection & Metering Diagrams, Equipment, Power, Lighting, Grounding Layouts, Elementary / Interlock Diagrams, Electrical Area Classification maps, Cable schedules, Electrical calculation / Relay setting Calculations etc. Shall be able review Detail Design Drawings / documents from other consultants and vendor information. Shall be able to coordinate with other disciplines and participate in discussions with clients. Hands on experience on ETAP.

3) INSTRUMENTATION DESIGN ENGINEERS

Shall have exposure to all instrument engineering activities and work processes found in this sector, including the preparation of;

• Technical specifications and project instructions
• Technical calculations, including the sizing of control valve, pressure relief valves and flow meters.
• Experience with DCS, PLS, and ESD engineered systems found in the process plant industries.
• Experience with Field Bus Technology
• Conversant with industry standard software applications, including Intergraph Smart Plant Instrumentation.




4) MECHANICAL – PIPING ENGINEER

Shall have exposure to Process in plant piping engineering activities and work processes found in this sector and will be responsible for the following:

Proposal Stage:

Evaluate incoming RFQ’s for Piping scope of work and quantify manhour requirements and any special technical requirements to complete the job

FEED / Project Proposal:

Articulate overall Project Piping requirements as defined by Process Engineering through PFD’s, P&ID’s and Basis of Design Documents

Search for and retrieve existing relevant client drawings, develop Piping portion of the Project drawing control

Revise existing Plot Plans to incorporate Piping installation or coordinate with Facilities Planner to develop “Grassroots” Layout

Receive from Process Engineering, process generated Piping requirements such as Line Designation Table, Piping MAOP, Design Pressure & Temperature, Special Pipe Material considerations, Pipe sizing, Pipe Slope requirements, etc.

Complete Piping related calculations such as wall thickness, corrosion allowance etc.

Complete Piping Plot plans, Bulk MTO’s – Piping

Complete Scope of Work Description- FEED / Project Proposal

Complete Discipline / Squad Check – QA/QC level

Support Procurement Effort for DCPR’s and material sourcing

Detailed Design

Articulate overall Project Piping requirements as defined by Project Proposal / FEED drawings and documents through PFD’s, P&ID’s and Piping Plot plans

Search for and retrieve existing relevant client drawings and process revision numbers or apply for new drawing numbers.

Develop Piping portion of the Detailed Project drawing control. Finalize Plot Plans

Receive from Process Engineering, final process generated Piping requirements such as final PFD’s, P&ID’s, Line Designation Table, Piping MAOP’s, Design Pressure & Temperature, Special Pipe Material considerations, Pipe sizing, Pipe Slope requirements, process related special installation requirements, etc.

Complete Piping related calculations such as wall thickness, corrosion allowance, pipe stress, etc

Complete Piping Isometric Drawings, Hydrostatic Drawings, Construction Scope of Work Description

Post Design Project Support

Review NMR drawings of equipment for piping interface.




5) PROCESS DESIGN ENGINEERS

Shall have exposure to all process engineering activities and work processes found in this sector, including the preparation of;

• Technical specifications and project instructions
• Technical calculations for sizing of static and rotating equipment, horizontal and vertical vessels, and process and utility piping systems, for onsite and offsite process units.

Conversant with industry standard software applications, including AspenTech Process Evaluator, KBase, and Hysis, including Intergraph SmartPlant applications.


Engineering

Desired Candidate Profile

All Engineers shall have respective Engineering Degree with a minimum 7 – 10 years of Engineering Design experience from Conceptual Front End Engineering Design to Detailed Engineering related to Oil & Gas, Refineries & Petrochemical Industries and shall be conversant with the application and verification of relevant International Codes and Standards and capable of working on all project activities found in such Industries. They shall also provide Procurement & Construction Management support. All Engineers should have Engineering Design Consultancy Experience. Shall have very good inter-personal and effective communication skills

Keywords

Piping Design oil gas Process Design Engineer Feed Offshore Petroleum Petrochemical Mechanical Engineering Electrical Engineering Civil Engineering Project Management Instrumentation Engineer Structural Design Engineer Design Engineer

Login To ApplyRegister & ApplyApply Without Registration

REPORT THIS JOB

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information.We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at abuse@naukrigulf.com

National Advanced Consulting Engineering Company (NACEC)

National Advanced Consulting Engineering Company (NACEC) is committed to provide full service engineering and project management solutions. National Advanced Consulting Engineering Company (NACEC) employs world-class capabilities with more than 600 talented professionals and leverages the latest technologies in the field of engineering to service clients across various sectors: Chemicals; Health & Education; Infrastructure; Mining & Metals; Power, Water, & Utilities; Oil & Gas; and Specialized Services. National Advanced Consulting Engineering Company (NACEC) is active across the MENA region and has offices in KSA and UAE. This allows us to appropriately tailor our capabilities to meet the requirements of our clients, and care for the societies we service, the environment, and the world. For more information:
Please visit: www. nacecgroup. com
More
View Contact Details

Contact

Name/ Designation:
- HR Manager

Website https://www.nacecgroup.com


Additional Information Required

Employer has requested some additional information along with your application for this job

Login to Naukrigulf

Continue using

All your activity will remain private

or