Quality Control Inspector EMSTEEL Group

Essential Duties and Responsibilities In Line Inspection at Mills Inline inspection and classification of the rolled product as per standard. Report non conformities immediately to the mills for corrective action to minimize production of non-confirming product. Shall be responsible for performing all inspection functions, identification, and segregation of Nonconforming items, as specified in the Emirates Steel QS Program to ensure compliance to applicable Standards, ASME Code and Customer requirements. Sampling Provide samples at specified frequency for testing as per specification. Inspect components or assemblies and perform final checks on completed products, if required. Re-inspection of Held Material Carry out re-inspection after rectification/retesting to classify. Re inspection to also record the results of inspection, calculate the number of defects, and prepare inspection and test reports. Essential Duties and Responsibilities(Contd) Inspection of Billets To carry out random dimensional check, surface defects and verify the chemical analysis results on billets to assign the grades. Locate the cause of defects and correct production problems. SAP Data Entry & Release Enter the inspection data in the SAP and make usage decision. Safety Health & Environment To maintain and comply with the company safety, health & environmental aspects at the workplaces to avoid injuries, damage to equipment/environment. Additional Duties and Responsibilities System Adequacy Implementation of ISO 17025 as per company’s testing standard requirement, procedures, and work instructions. NQA Responsibility The Quality Control Inspectors (QC Inspectors) report to the QC Supervisor but shall report directly to the Head of QC in the absence of the QC Supervisor, and shall be responsible for performing all inspection activities, as specified in the QP. The Quality Control Inspectors shall bring to the attention of the QC Supervisor any deviations that affect quality. The Quality Control Inspectors shall ensure that nonconforming items are identified, reported and segregated in accordance with Section 7.0 of this NQA Manual.